 |
| Eltharion and Stormwing - Drilled and ready |
Recently, I finalised an idea that I had in mind for many years. I wanted to drill my Eltharion on Stormwing miniature and insert a metal piece between the High Elf and the Griffon so that it held better.
More recently, I broke it by inadvertence. So that gave me the perfect opportunity to drill the model. I used the smallest bit that I have for my drill. I drilled about 1.5 mm inside of the miniature and 1.5 inside the griffon. Then I took a paperclip and cut it to roughly 3 mm. I verified that it fit well and cut a tiny bit more if necessary.
 |
| Eltharion and Stormwing, 4th Edition Warhammer |
Finally, I made some epoxy glue, which I prefer for metal on metal. I dipped the 3 mm paperclip piece in the glue and then placed the glue-covered part in the griffon. Then I carefully applied some glue under Eltharion and also on the part of the paperclip that stuck out of the griffon and then joined both pieces together.
Thanks for reading!
Donate crypto (BTC, ETH, BCH, others...) and use my referral links: https://cointr.ee/archivist
Check out my Publish0x channel: https://www.publish0x.com/intelli-gaming
Or Read.cash if you know your coins... https://read.cash/@Librarian
Also visit my Odysee channel: https://odysee.com/@IntelliGaming:6
No comments:
Post a Comment